|
ASTM D1831 Roll Stability Apparatus Dual-Cylinder Grease Roll Stability Tester with Digital Timer
| MOQ: | 1 set |
| Price: | Negotiable |
| Standard Packaging: | Standard export packaging |
| Delivery Period: | 5~8 working days |
| Payment Method: | L/C,T/T |
| Supply Capacity: | 500 sets/month |
Lubricating Grease Roll Stability Apparatus
,Petroleum Testing Roll Stability Apparatus
,Grease Roll Stability Testing Equipment
The BD-1831 Roll Stability Apparatus for Lubricating Grease conforms to ASTM D1831, the Standard Test Method for Roll Stability of Lubricating Grease. The test begins by determining the cone penetration of an approximately 50 g aliquot of lubricating grease. The grease is then subjected to low shear at 20 to 35 °C (68 to 95 °F) for 2 h ± 5 min in a standard roll stability apparatus, after which the cone penetration is measured again. The difference between the cone penetration before and after working serves as a measure of the effect of flow shear working on grease consistency. This apparatus is suitable for testing the consistency change of lubricating grease after working on the roller tester, allowing evaluation of the mechanical shear stability of the grease.
- Digital timer for recording test duration, equipped with an audible alarm.
- Belt-driven drums for reliable, consistent operation.
- Capable of testing two drums simultaneously.
- Instrument housing lid features a thermometer port for temperature calibration; idler rollers are fitted with positioning rings to ensure proper drum operation.
- Microcomputer temperature controller with digital display and PT100 sensor; accuracy: ±5 °C.
- Balanced cast-aluminum fan and 800 W heater ensure efficient and uniform heat distribution.
- Microprocessor-based PID control enables rapid and stable heating, while an overheat protection circuit safeguards the unit.
| Applicable standard | ASTM D1831 |
|---|---|
| Heating method | Electric heating circle |
| Time method | Digital timer |
| Temperature control range | Room temperature to 180 °C |
| Motor speed | 155 to 180 r/min |
| Unit of work | 2 units |
| Rated voltage | AC 220 V / 50 Hz |
| Drum rotation speed | 165 ± 15 rpm |
|---|---|
| Thermostat temperature | Room temperature to 80 ± 1 °C |
| Number of drums | Single-cylinder or dual-cylinder options available |
| Roller specifications | Stainless steel, Ø90 * 180 mm, 5 kg |
| 1/4 cone and rod | 9.38 ± 0.025 g |
| Power supply | 220 V ± 10% AC, 50 Hz |
| Instrument dimensions | 700 * 440 * 450 mm |
| Weight | ~30 kg |
| No. | Item | Qty |
|---|---|---|
| 1 | Roller tester | 1 |
| 2 | Roller | 2 |
| 3 | Thermometer (0–100 °C) | 1 |
