Penski Martin Closed Cup Manual Flash Point Tester Heating Power 230W BD-D93-002

BD-D93-002 closed flash point tester (manual type)

Application :

BD-D93-002 closed flash point tester uses the Penski-Martin closed cup method to measure the flashover of flammable liquids (such as diesel, kerosene, insulating oil, fuel oil, etc.), liquids with suspended particles, liquids whose surfaces tend to form films under test conditions, and other liquids. pip value. This instrument is suitable for measuring flash point values above 40 °C.

Applicable standard

GB/T 261

ASTM D93

Performance characteristics

1. The instrument adopts manual ignition method, and the flame size of the igniter is adjustable.

2. The electric stirring device equipped with the instrument has reliable performance and stable stirring rate, which can ensure that the speed is always maintained within the range of 90~120r/min, and it is simple and convenient to open the oil cup cover by manual rotation.

3. The oil cup cover of the instrument adopts manual opening method, which is exquisitely designed and easy to operate.

4. The instrument is equipped with a semi-enclosed windshield, which can reduce the impact of strong light and air flow on the experiment.

5. The heating system of the instrument adopts digital display voltage regulation and temperature control, and the heating rate can be adjusted according to needs.

Technical indicators

1. Working power supply: AC220V±10% 50Hz standard 10A plug

2. Heating power: 230W

3. Overall dimensions: 260×330×310 (mm)